Round connecting nut
The round connecting nut / connector sleeve is used as the name suggests to connect/join threaded parts. In our tension rod system, the connector sleeve is used between ex. threaded rod and a tension rod.
The round connecting nut is CE-marked and BASTA registered.
Inspection dimension when installing:
Minimum screw length 1.5 x dimension. (E.g. M16=16x1.5=24 mm)
When connecting, we utilise the total dimension of the sleeve split over two equivalent thread lengths.
Hot-dip galvanising: ISO 10684: 2004
Mechanical properties: ISO 898-2:1992
Thread tolerance: ISO standard
Impact strength: 27J -20°C
ID-marked for enhanced traceability.
For more technical information contact us.